close
close
Complete Turbochargers | Replacement Parts & Service Kits
click to zoom in
  • Where to buy

    Visit where to buy page please!

  • In-House Experts

    888-596-9899

Coolant & Oil Line Kit for 2012-2021 Chevrolet 1.4L K1040310N

SKU:
K1040310N
Part Type:
Coolant & Oil Line Kit
Product Condition:
New
Application Type:
OE Replacement
Where to buy

Turbocharger oil and coolant lines play an integral role in determining the longevity of a turbocharger. They provide the necessary fluids to lubricate and cool the turbocharger during normal operation, but if neglected, can lead to catastrophic failure of the unit. Over time, engine heat causes carbon deposits to build up within the lines, resulting in blockages that can starve the turbocharger. Oil and/or coolant lines should be replaced any time a turbocharger is removed or replaced. Our new oil and coolant lines are the result of years of research and process development aimed at producing the highest quality products in the aftermarket. Designed to meet or exceed O.E. performance, our lines are a direct fit, critical component to your turbocharger service.

  • Designed in-house to meet or exceed O.E. performance.
  • Custom designed spatial testing jigs used to confirm vehicle fitment for each application.
  • Every line is pressure tested in-house to meet or exceed O.E. pressure requirements and prevent leaks
  • In-house flow testing simulates engine conditions to ensure lines meet or exceed O.E. fluid flow rate requirements
  • O.E. materials used to guarantee corrosion resistance.
  • O.E. sealing technologies and materials used to prevent leaks.

PRODUCT INFORMATION

Application(s)

2013-2021 Buick Encore L4 1.4L

2013-2016 Chevrolet Cruze L4 1.4L

2016 Chevrolet Cruze Limited L4 1.4L

2012-2020 Chevrolet Sonic L4 1.4L

2014-2021 Chevrolet Trax L4 1.4L

OE Interchange(s)

55567067, 55568031, 55587854

Please review the Warranty Policy here.

AVERAGE REPLACEMENT TIME

8 hours 

SKILL LEVEL

Service Technician “B” or higher 

INITIAL INSPECTION AND GENERAL CARE 

  1. Carefully inspect the air cleanerair cleaner duct, and the exhaust manifold for any foreign material. Objects left in these areas can severely damage the turbocharger immediately on engine startup. 
  2. Remove old gaskets and left-over material from the exhaust manifold, the oil supply line and oil drain line flanges. Inspect these surfaces for cracks, flatness, or erosion. 
  3. Inspect the oil supply and drain lines for degradation and cracking 
  4. Make sure that there are no kinks or any other type of restriction or clogging in either line. 

 

Click here for the complete guide

INDUSTRY-LEADING WARRANTY
40 YEARS OF SERVICE