Have Questions?
-
Free Ground Shipping
To Contiguous US States
-
In-House Experts
We know our products
-
-
Reman Turbo for 2003-2005 2.7L Automatic Trans. Audi K8030170R Call to Order

- Please call our support team at 1-888-596-9899 or fill out a technical support form in order to purchase this item
- All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
- Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
- All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
- 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
- Each unit comes with a pre-lube syringe to ensure product protection during installation.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Product Information
Rotomaster SKU | K8030170R |
Product Condition | Remanufactured |
Package Contents | Turbocharger, Gasket(s), Seal(s), Washers, Syringe |
Application |
2003-2004 Audi A6 Quattro 2.7L Auto Trans. Left 2005 Audi Allroad Quattro 2.7L Auto Trans. Left 2003-2004 Audi Allroad Quattro 2.7L Auto Trans. Left
|
OE Part Number | 078 145 704 Q |
Manufacturer's Warranty | 12 months from the date of purchase. |
Please review the policy here
AVERAGE REPLACEMENT TIME
8 hours
SKILL LEVEL
Service Technician “B” or higher
INITIAL INSPECTION AND GENERAL CARE
- Carefully inspect the air cleaner, air cleaner duct, and the exhaust manifold for any foreign material. Objects left in these areas can severely damage the turbocharger immediately on engine startup.
- Remove old gaskets and left-over material from the exhaust manifold, the oil supply line and oil drain line flanges. Inspect these surfaces for cracks, flatness, or erosion.
- Inspect the oil supply and drain lines for degradation and cracking.
- Make sure that there are no kinks or any other type of restriction or clogging in either line.
Click here for the complete guide