Have Questions?

  • Free Ground Shipping

    To Contiguous US States

  • In-House Experts

    We know our products

Reman Turbo for 2011-2014 6.7L Ford A8670102R Call to Order

Rotomaster
A8670102R
In stock
Reman Turbocharger
$0.00
$0.00

Reman Turbo for 2011-2014 6.7L Ford A8670102R Call to Order
  • Please call our support team at 1-888-596-9899 or fill out a technical support form in order to purchase this item
  • All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
  • Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
  • All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
  • 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
  • Each unit comes with a pre-lube syringe to ensure product protection during installation.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Product Information

Rotomaster SKU A8670102R
Product Condition Remanufactured
Package Contents Turbocharger, Gasket(s), Studs, Seal(s), Washers, V-Bands, Syringe
Application

2014 Ford F-250 Super Duty Pickup 6.7L

2011-2013 Ford F-250 Super Duty Pickup 6.7L

2014 Ford F-350 Super Duty Pickup 6.7L Excluding Cab & Chassis

2011-2013 Ford F-350 Super Duty Pickup 6.7L Excluding Cab & Chassis

2014 Ford F-450 Super Duty Pickup 6.7L

2011-2013 Ford F-450 Super Duty Pickup 6.7L Excluding Cab & Chassis

 

OE Part Number BC3Z 6K682-C 
Manufacturer's Warranty 12 months from the date of purchase.
Read More
Read Less

AVERAGE REPLACEMENT TIME 

8 hours 

SKILL LEVEL 

Service Technician “B” or higher 

INITIAL INSPECTION AND GENERAL CARE 

  1. Carefully inspect the air cleanerair cleaner duct, and the exhaust manifold for any foreign material. Objects left in these areas can severely damage the turbocharger immediately on engine startup. 
  2. Remove old gaskets and left-over material from the exhaust manifold, the oil supply line and oil drain line flanges. Inspect these surfaces for cracks, flatness, or erosion. 
  3. Inspect the oil supply and drain lines for degradation and cracking 
  4. Make sure that there are no kinks or any other type of restriction or clogging in either line. 

Click here for the complete guide

Your cart

×